Metallurgy electric hoist high cost reflects

Metallurgy electric  Rope hoist  also called "marine electric hoist" is mainly used for high temperature place, but requires working environment temperature is not higher than 60 ℃. Metallurgy electric hoist for three-phase AC power supply, 50HZ, 380V, electric hoist lifting mechanism working-level M6, since 2012 has been listed by product favored by new and old customers, so hot products are derived from the high cost, the following detailed description of your metallurgy electric hoist high cost reflected.


Metallurgy electric  wire rope hoist  and safety brake with brake support. In normal working hours by a conical rotor brake motor supported on the brake on the transmission mechanism. If transmission from the motor to the drum of any link between the malfunction, resulting in speeding down the hook and the load material, by one set on the reel to reel brake stop safety brake to prevent load drop caused by speeding things accidents.
Metallurgy electric hoist not only set up a dual brake and set up a double-digit and drop ceiling limit device, set both overcurrent, voltage, phase sequence protection and overload limiter from the weight, decreased speed and other power protection safety device. Enhance the safe use of electric hoist performance.
Motor insulation class H, using steel core 6 × 371WR rope to meet the needs of the metallurgical production conditions. When the reducer and motor below the set temperature insulation protection, electric  lift hoist  drum shell in the design and installation of the machine below the heat shield to isolate the molten metal heat radiation.
Metallurgical hoist type using the remote control away from heat or follow the style of control to ensure operator safety.