Crane wire rope maintenance points to note

(1) the period of use rope and use of a great relationship,wire rope hoist it should be done according to the requirement to use, not drag, throw, allowed the use of overload, are not allowed to take place at an acute angle to make rope bent down drastically changed not allowed speed, to avoid shock loads;
(2) when the rope with rust and grime with a wire brush to and oiled;
(3) use of four months each rope oiled once oiled is best to use hot oil (50 ℃ or so) soaked rope core, and then wipe off excess grease;
(4) should be placed after a good rope disc clean, dry place,wire rope winch not overlapping stacked to prevent sprains;
(5) ends with a wire rope fastened or low melting point alloy weld, can also be used hoop hoop tight, so as not to loose rope;
(6) use, if the surface of the oil droplets extruded wire rope, wire rope has expressed considerable force to bear,rope hoist then increase the load should stop and check, if necessary, replaced with new wire rope.