How to install electric hoist control box

Electric  Rope hoist  control box by the transformer, box, contactors, terminals and other components, electric hoist control box can also be based on user requirements available in different lengths and flashlight door multi-core cables, the following introduces you how to install electric  wire rope hoist  control box.

After the control box lid opened from the hinge removable, easy user installation, maintenance, control box has to be had electrical and mechanical interlock chain, so that the same group of two contactors can not simultaneously connected to the circuit; each control box containing electrical schematics, wiring terminals are clearly consistent with the schematic diagram number, user maintenance, wiring.
1, the installation must be checked before connecting screw is loose, the product was damaged during transport if found defective, risks must be rapidly eliminated.
2, electric hoist control box must be mounted vertically. .
3, the test must be checked whether the  lift hoist  working condition consistent with the buttons, which do not meet the control box wiring should be adjusted to change the phase sequence.
4, the installation should pay attention to wiring coding shall be in accordance electrical schematic wiring.