Chain block usefulness and benefits

Chain block is suitable for short distance cargo lifting equipment and small, from the weight of not more than 100T.manual chain block hoist Chain hoists shell material is high-quality alloy steel, extremely resistant, high safety performance.When Chain block hoist heavy objects up clockwise hands and pulled the chain, bracelet wheel rotates counterclockwise hands to pull the chain when pulled down with the brake pads brake seat separation ratchet pawl still under the effect of the five electric chain hoist and trolley major axis drive gear lifting chain running in the opposite direction, thus steadily decreased weight.

Equipment Chain Block maintenance methods

=After use should be clean and coated with rust gourd oil, stored in a dry place to prevent rust and corrosion from moisture chain hoists.
Maintenance and repair should be more familiar with the hoist mechanism were conducted using kerosene to clean hoist parts,electric hoist with trolley gear and bearing parts, plus grease lubrication, to prevent those who do not understand the principle of the free entry machine performance.
Equipment Chain Block hoist After cleaning and maintenance, load test should be carried out to confirm working, reliable braking can be delivered.
Brake friction surfaces must be kept clean. Brake parts should be regularly checked to prevent brake failure occurred since heavy fall phenomenon.
Around the sprocket chain hoists lifting roller bearings can be used in the butter has been pressed adhesion lifting sprocket mounted on the journal bearing inner ring, and then into the wall of the bearing outer ring.
Chain hoists when installing brake parts, pay attention to the ratchet and pawl claw portion engages alveolar good control of the pawl spring should be flexible and reliable equipment to get started after sprocket wheel clockwise bracelet, it will ratchet friction piece pressed the brake seat,small electric hoist bracelets wheel counterclockwise rotation between the ratchet and the friction plate should be no gaps.
In order to facilitate maintenance and removal, hand chain in which a series opening chain (no welded shut).
In the refueling process and the use of chain hoists, brake friction surfaces must be kept clean and regularly check whether the braking and prevent brake failure caused by heavy since fall.

Check the chain block hoist specification of

Lifting chain is an important component parts manual hoist, is the most widely used lifting sling,Manual block general manual hoist with a maximum of 80 chain, their production processes are to undergo numerous checks, preparation period before use it should be part of what the manual hoist chain inspection work done?
Check the chain inside / outside links for deformation, cracks, corrosion; regret cause long-term use because of the chain chain chain piece pieces rubbing against each other so thin, and therefore to be checked prior to use chain wear pieces; check the chain lubrication is good; Finally, it should clearly not mix old and new chain.
Liftech Equipment Chain Block hoist lifting is an important tool, except for the chain before using the site inspection,steel beam clamps the need to substantially against other major components check to make sure the correct lifting operations can be conducted.

Winch Snatch Block maintenance

Winch Snatch Block often used in harsh conditions. Therefore, the daily use will seriously affect their life.wire rope hoist suppliers Must not neglect routine maintenance. Winch Snatch Block internal easy water, the need for frequent dismantling and maintenance (Recommendation 1 year / 1), to replace the butter and checking gear. Cable if dead fold, broken wire, etc. there needs to be replaced. Winch Snatch Block check whether there has been slipping clutch.
Try to avoid too much wading.Wire rope winch Winch relay requires frequent checks are normal, electric shock, burning with or without conditions, and to connect the winch ground. Reduce long uninterrupted operation winch, so the relay overheating.

Winch Snatch Block Introduction

Winch Snatch Block with high precision, load, wear resistance, strength, etc., and to overcome the shortcomings of the cast iron wheel breakable,small electric winch drum roll assembly center hole are uranium bearing, nylon engineering composite sets, significantly reducing the friction coefficient, thereby improving the life of pulley assembly 3-5 times, has been widely used in hydropower engineering,Wire rope winch  metallurgical coal mines, bridges lifting, lifting industry. Winch is twisted cable drum with vertical installation in power-driven but can not store the rope winding machinery, but also refers to the axis of rotation of the winch and deck vertical, vehicle, ship self-protection and traction devices available in the snow, swamps, deserts, beaches, muddy mountain road in harsh environments such as self-help and rescue. Mainly used for off-road vehicles,motorized trolley farm vehicles, ATV all-terrain vehicles, boats, fire rescue vehicles, wrecker, and other special-purpose vehicles, special vehicles.

Explosion Liftech Equipment Chain Block - using rules

Liftech Equipment Chain Block Do not overload use. Do not operate with a power other than human. Before using the parts required to confirm intact, transmission parts and lifting chain oiled,electric chain block idling normal. Before checking whether lifting hook hanging down firmly. Do weights hanging at the tip of errors such operations.
Liftech Equipment Chain Block lifting chain should be hung vertically, not a wrong twist of chain link, double under hook rack chain not flip. The operator should stand on the same plane with the bracelet round hands pulled the chain to make bracelets wheel rotates clockwise, you can make the weight rise; reverse pull chain hands, noon to slowly decline.manual chain block hoist When lifting heavy objects, strictly prohibited under heavy loads to do any work or walking, in order to avoid personal injury. Liftech Equipment Chain Block in the lifting process, regardless of the weight up or down, drag chain hands, the force should be uniform gentle, do not use too much force, so as not to hand chain jumping or snap ring. When the operator is found hand-pull tension greater than normal, you should immediately stop using it.chain block Maintenance Methods: gourd should be cleaned after use and coated rust oil, stored in a dry place. Maintenance and repair should be more familiar with the hoist mechanism were carried out to prevent those who do not understand the principle of the free entry machine performance.